Xerox 4520 - Manual (Page 124)

P r i n t e r S e t t i n g s t h a t A f f e c t M e m o r y
3-70 ❖ 4 5 2 0 / 4 5 2 0 m p U s e r ’ s G u i d e
Jam Recovery
PCL Menu (page 3-26)
PostScript Menu (page 3-34)
A paper jam may cause a page image being printed to become lost. When
Jam Recovery is On , the printer will automatically reprint the image of the
jammed page, after the jam has been cleared.
Because the printer holds a page image in memory longer with Jam
Recovery , if a low memory condition occurs there can be a slight
performance impact and the printer may require more memory. If sufficient
memory exists,
Jam Recovery has no impact.
Resolution
PCL Menu (page 3-27)
PostScript Menu (page 3-35)
The printer prints at 800, 600, 400, or 300 dpi. The factory-set default is
600 dpi.
Your software application may be able to set Resolution and override the
setting here. Whether a new Resolution is set by your application or on
the Control Panel, the new Resolution becomes effective with the next
print job or with a printer reset. Unless State Saving (page 3-28 for PCL,
page 3-37 for PostScript, and page 3-71) is On , downloaded fonts and
macros may be cleared from memory.
The higher the resolution, the more memory required. See Figure 3.24
(page 3-72) for memory requirements.
Figure 3.23 PCL and PostScript Menu options that affect performance and memory usage
Option Description
WUG-CH03 Page 70 Black,Red,Cyan Tuesday, March 21, 1995 4:54 PM