Xerox 4520 - Manual (Page 61)

C o n t r o l P a n e l F e a t u r e s
C h a p t e r 3 : U s i n g t h e C o n t r o l P a n e l ❖ 3-7
Up In the menu system, scrolls backward (up) through submenus or through the current list of
values or functions.
For numeric values such as number of Copies , press Up to increase the number.
Scrolling wraps—if the first item in a list is displayed, press Up to display the last item
in the list.
Press Up for more than two seconds to scroll continuously. During scrolling, there
may be a greater increment for each step than that for single presses. For example, for the
PCL Menu setting
Pitch (page 3-20), the single press increment is 0.01 whereas the scrolling
increment is 1.00.
When the hard disk option has been installed, press Up to respond to a disk failure
error message. Pressing Up will reformat the hard disk. See
Chapter 7: Troubleshooting, “Displayed Control Panel Messages” (page 7-5), for more
information on hard disk failure error messages.
Down In the menu system, scrolls forward (down) through the submenus or through the current
list of values or actions.
For numeric values such as number of Copies , press Down to decrease the number.
Scrolling wraps—if the last item in a list is displayed, press Down to display the first
item in the list.
Press Down for more than two seconds to scroll continuously. During scrolling, there
may be a greater increment for each step than that for single presses. For example, for the
PCL Menu setting
Pitch (page 3-20), the single press increment is 0.01 whereas the scrolling
increment is 1.00.
When the hard disk option has been installed, press Down to respond to a disk
failure error message. Hard disk usage will be aborted when Down is pressed. See
Chapter 7: Troubleshooting, “Displayed Control Panel Messages” (page 7-5) , for more
information on hard disk failure error messages.
Figure 3.3 Control Panel keys and their functions (continued)
Key Description
WUG-CH03 Page 7 Black,Red,Cyan Tuesday, March 21, 1995 4:54 PM