ZyXEL Communications XGS-4526 User Manual
Page 108
Chapter 9 VLAN
XGS-4526 User’s Guide
108
The following table describes the labels in this screen.
Table 22 Advanced Application > VLAN > VLAN Port Setting > Protocol Based
VLAN Setup
LABEL
DESCRIPTION
Active
Check this box to activate this protocol based VLAN.
Port
Type a port number to be included in this protocol based VLAN.
This port must belong to a static VLAN in order to participate in a protocol
based VLAN. See
for more details on setting up
VLANs.
Name
Enter up to 32 alphanumeric characters to identify this protocol based
VLAN.
Ethernet-
type
Use the drop down list box to select a predefined protocol to be included in
this protocol based VLAN or select Others and type the protocol number in
hexadecimal notation. For example, the IP protocol in hexadecimal
notation is 0800, and Novell IPX protocol is 8137.
Note: Protocols in the hexadecimal number range of 0x0000 to 0x05ff
are not allowed to be used for protocol based VLANs.
VID
Enter the ID of a VLAN to which the port belongs. This must be an existing
VLAN which you defined in the Advanced Applications > VLAN screens.
Priority
Select the priority level that the Switch will assign to frames belonging to
this VLAN.
Add
Click Add to save your changes to the Switch’s run-time memory. The
Switch loses these changes if it is turned off or loses power, so use the
Save link on the top navigation panel to save your changes to the non-
volatile memory when you are done configuring.
Cancel
Click Cancel to begin configuring this screen afresh.
Index
This is the index number identifying this protocol based VLAN. Click on any
of these numbers to edit an existing protocol based VLAN.
Active
This field shows whether the protocol based VLAN is active or not.
Port
This field shows which port belongs to this protocol based VLAN.
Name
This field shows the name the protocol based VLAN.
Ethernet-
type
This field shows which Ethernet protocol is part of this protocol based
VLAN.
VID
This field shows the VLAN ID of the port.
Priority
This field shows the priority which is assigned to frames belonging to this
protocol based VLAN.
Delete
Click this to delete the protocol based VLANs which you marked for
deletion.
Cancel
Click Cancel to begin configuring this screen afresh.