ZyXEL Communications XGS-4526 - Manual (Page 201)

Chapter 23 VLAN Stacking
XGS-4526 User’s Guide
201
23.4 Configuring VLAN Stacking
Click Advanced Applications > VLAN Stacking to display the screen as shown.
Figure 98 Advanced Application > VLAN Stacking
The following table describes the labels in this screen.
Table 58 Advanced Application > VLAN Stacking
LABEL DESCRIPTION
Active Select this checkbox to enable VLAN stacking on the Switch.
Port The port number identifies the port you are configuring.
* Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use
this row first to set the common settings and then make adjustments on a port-
by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make
them.