ZyXEL Communications XGS-4526 - Manual (Page 351)

Chapter 39 Access Control
XGS-4526 User’s Guide
351
Table 128 SNMP IP Traps
OPTION OBJECT LABEL OBJECT ID DESCRIPTION
ping pingProbeFailed 1.3.6.1.2.1.80.0.1 This trap is sent when a single ping
probe fails.
pingTestFailed 1.3.6.1.2.1.80.0.2 This trap is sent when a ping test
(consisting of a series of ping probes)
fails.
pingTestCompleted 1.3.6.1.2.1.80.0.3 This trap is sent when a ping test is
completed.
traceroute traceRouteTestFailed 1.3.6.1.2.1.81.0.2 This trap is sent when a traceroute
test fails.
traceRouteTestCompleted 1.3.6.1.2.1.81.0.3 This trap is sent when a traceroute
test is completed.
Table 129 SNMP Switch Traps
OPTION OBJECT LABEL OBJECT ID DESCRIPTION
stp STPNewRoot 1.3.6.1.2.1.17.0.1 This trap is sent when the STP
root switch changes.
MRSTPNewRoot 1.3.6.1.4.1.890.1.5.8.52.4
3.2.1 This trap is sent when the
MRSTP root switch changes.
MSTPNewRoot 1.3.6.1.4.1.890.1.5.8.52.1
07.70.1 This trap is sent when the MSTP
root switch changes.
STPTopologyChange 1.3.6.1.2.1.17.0.2 This trap is sent when the STP
topology changes.
MRSTPTopologyChange 1.3.6.1.4.1.890.1.5.8.52.4
3.2.2 This trap is sent when the
MRSTP topology changes.
MSTPTopologyChange 1.3.6.1.4.1.890.1.5.8.52.1
07.70.2 This trap is sent when the MSTP
root switch changes.
mactable MacTableFullEventOn 1.3.6.1.4.1.890.1.5.8.52.3
1.2.1 This trap is sent when more
than 99% of the MAC table is
used.
MacTableFullEventClear 1.3.6.1.4.1.890.1.5.8.52.3
1.2.2 This trap is sent when less than
95% of the MAC table is used.
rmon RmonRisingAlarm 1.3.6.1.4.1.890.1.5.1.1.16
.0.1 This trap is sent when a variable
goes over the RMON "rising"
threshold.
RmonFallingAlarm 1.3.6.1.4.1.890.1.5.1.1.16
.0.2 This trap is sent when the
variable falls below the RMON
"falling" threshold.
cfm dot1agCfmFaultAlarm 1.3.111.2.802.1.1.8.0.1 The trap is sent when the
Switch detects a connectivity
fault.