ZyXEL Communications XGS-4526 - Manual (Page 69)

Chapter 6 Tutorials
XGS-4526 User’s Guide
69
4
In the Static VLAN screen, select ACTIVE, enter a descriptive name (VALN 102
for example) in the Name field and enter 102 in the VLAN Group ID field.
5
Select Fixed to configure port 2 to be a permanent member of this VLAN.
6
Clear the TX Tagging check box to set the Switch to remove VLAN tags before
sending.
7
Click Add to save the settings to the run-time memory. Settings in the run-time
memory are lost when the Switch’s power is turned off.
Figure 32 Tutorial: Create a Static VLAN
8
Click the VLAN Status link in the Static VLAN screen and then the VLAN Port
Setting link in the VLAN Status screen.
Figure 33 Tutorial: Click the VLAN Port Setting Link