ZyXEL Communications XGS-4526 - Manual (Page 70)

Chapter 6 Tutorials
XGS-4526 User’s Guide
70
9
Enter 102 in the PVID field for port 2 to add a tag to incoming untagged frames
received on that port so that the frames are forwarded to the VLAN group that the
tag defines.
10
Click Apply to save your changes back to the run-time memory.
Figure 34 Tutorial: Add Tag for Frames Received on Port 2
11
Click the Save link in the upper right corner of the web configurator to save your
configuration permanently.
6.2.3 Configuring DHCP Relay
Follow the steps below to enable DHCP relay on the Switch and allow the Switch to
add relay agent information (such as the VLAN ID) to DHCP requests.
1
Click IP Application > DHCP and then the Global link to open the DHCP Relay
screen.
2
Select the Active check box.
3
Enter the DHCP server’s IP address (192.168.2.3 in this example) in the Remote
DHCP Server 1 field.
4
Select the Option 82 and the Information check boxes.