ZyXEL Communications XGS-4526 - Manual (Page 71)

Chapter 6 Tutorials
XGS-4526 User’s Guide
71
5
Click Apply to save your changes back to the run-time memory.
Figure 35 Tutorial: Set DHCP Server and Relay Information
6
Click the Save link in the upper right corner of the web configurator to save your
configuration permanently.
7
The DHCP server can then assign a specific IP address based on the DHCP
request.
6.2.4 Troubleshooting
Check the client A’s IP address. If it did not receive the IP address 172.16.1.18,
make sure:
1
Client A is connected to the Switch’s port 2 in VLAN 102.
2
You configured the correct VLAN ID, port number and system name for DHCP relay
on both the DHCP server and the Switch.
3
You clicked the Save link on the Switch to have your settings take effect.