ZyXEL Communications XGS-4526 User Manual
Page 149
Advertising
Chapter 14 Bandwidth Control
XGS-4526 User’s Guide
149
Active
Select this check box to activate egress rate limits on this port.
Egress Rate Specify the maximum bandwidth allowed in kilobits per second (Kbps) for
the out-going traffic flow on a port.
Apply
Click Apply to save your changes to the Switch’s run-time memory. The
Switch loses these changes if it is turned off or loses power, so use the
Save link on the top navigation panel to save your changes to the non-
volatile memory when you are done configuring.
Cancel
Click Cancel to begin configuring this screen afresh.
Table 36 Advanced Application > Bandwidth Control (continued)
LABEL
DESCRIPTION
Advertising