Z Microsystems SL - Manual (Page 13)

Doc# 27-0032UM Rev A Issued 07/05
13
To pull out the Command Console, place
your hands so that your palms face up-
wards.
Your thumb should be on the tab of the
lock and the first three fingers are under
the pull-out bar.
Push the tabs towards each other and with
your fingers pull out the Console until the
first safety catch stops the slide action.
Press both slide catches inward and pull
the Console out. Allow the Console to stop
at the second catch.
To raise the display into viewing position,
locate the lockdown latch on the...
right top corner of the tray. Slide the tab
with the right hand to the right and lift
simultaneously the display with the left
hand...
Setup Console
INSTALLATION