Z Microsystems SL - Manual (Page 17)

Doc# 27-0032UM Rev A Issued 07/05
17
DISPLAY PANEL CONTROLS
The Command Console features push-button controls on the lower front of the front bezel.
To setup the display, use the following controls to fine tune the image on the screen:
NOTE: The following procedures are
written for setup using the
buttons on the display panel.
See the “SoftMenus” section of
this manual for remote setup.
Button functionality description table:
Channels
A — Green — VIDEO A is selected
B — Green — VIDEO B is selected
If A & B are both green, it indicates the Channel Auto Switching function is selected.
— green — power and signal
orange — power and no signal
off — Standby mode
Main
Display
Auto
Adjust
“Z”
< >
< > Menu Exit
Key
Func-
tions;
KVM of-
fers dual
function
Auto
Position;
KVM of-
fers dual
function
Move up
through
menu
func-
tions;
KVM of-
fers dual
function
Move
down
through
menu
func-
tions;
KVM of-
fers dual
function
Move
left to
adjust
value of
function;
KVM of-
fers dual
function
Move
right to
adjust
value of
function;
KVM of-
fers dual
function
Acti-
vates
menu
and
menu
func-
tions;
KVM of-
fers dual
function
Exit
from
main
menu or
return
from
sub-
menu
to main
menu;
KVM of-
fers dual
function
Hold down
to turn
backlight
on and
off; press
briefly and
repeat-
edly to
increase or
decrease
backlight
brightness
OPERATIONS