Introduction – Z Microsystems SL User Manual
Doc# 27-0032UM Rev A Issued 07/05
To avoid shock hazard:
Do not remove the covers around the
Do not connect or disconnect the
Command Console during an
The power cord plug must be connected
to a properly wired and grounded
Any equipment to which the
Command Console will be attached
must also be connected to properly
wired and grounded power outlets.
This Manual is also available on the Z Microsystems website (www.zmicro.com). We
recommend you read this manual carefully and follow the instructions in the Installation
chapter for veriﬁcation of system functions and control settings.