ZyXEL Communications 792H - Manual (Page 156)

Prestige 792H G.SHDSL Router
10-14 Creating Custom Rules
Figure 10-6 Adding/Editing Source and Destination Addresses
The following table describes the labels in this screen.
Table 10-5 Adding/Editing Source and Destination Addresses
LABEL DESCRIPTION
Address Type Do you want your rule to apply to packets with a particular (single) IP address, a
range of IP addresses (e.g., 192.168.1.10 to 192.169.1.50), a subnet or any IP
address? Select an option from the drop-down list box that includes: Single Address,
Range Address, Subnet Address and Any
Address.
Start IP Address Type the single IP address or the starting IP address in a range here.
End IP Address Type the ending IP address in a range here.
Subnet Mask Type the Subnet Mask here, if applicable.
Apply Click Apply to save your changes back to the Prestige.
Cancel Click Cancel to return to the previously saved settings.
10.8 Timeout
The fields in the Timeout screens are the same for Local and Internet networks, so
the discussion below refers to both.