ZyXEL Communications 792H - Manual (Page 231)

Prestige 792H G.SHDSL Router
Maintenance 17-5
Table 17-2 System Status: Show Statistics
LABEL DESCRIPTION
WAN Port Statistics This is the WAN port.
Link Status This is the status of your WAN link.
Transfer Rate This is the transfer rate in kbps.
Upstream Speed This is the upstream speed of your Prestige.
Downstream Speed This is the downstream speed of your Prestige.
Node-Link This field displays the remote node index number and link type. Link types are PPPoA,
ENET, RFC 1483 and PPPoE.
LAN Port Statistics This is the LAN port.
Status For the WAN port, this displays the port speed and duplex setting if you're using
Ethernet encapsulation and down (line is down), idle (line (ppp) idle), dial (starting to
trigger a call) and drop (dropping a call) if you're using PPPoE encapsulation.
For a LAN port, this shows the port speed and duplex setting.
TxPkts This field displays the number of packets transmitted on this port.
RxPkts This field displays the number of packets received on this port.
Errors This field displays the number of error packets on this port.
Tx B/s This field displays the number of bytes transmitted in the last second.
Rx B/s This field displays the number of bytes received in the last second.
Up Time This field displays the elapsed time this port has been up.
CPU Load This field specifies the percentage of CPU utilization.
Collisions This is the number of collisions on this port.
Poll Interval(s) Type the time interval for the browser to refresh system statistics.
Set Interval Click this button to apply the new poll interval you entered in the Poll Interval field
above.