ZyXEL Communications 792H - Manual (Page 366)

Prestige 792H G.SHDSL Router
32-4 System Maintenance and Information
32.3 Time and Date Setting
The Prestige keeps track of the time and date. There is also a software mechanism to set the time manually
or get the current time and date from an external server when you turn on your Prestige. Menu 24.10 allows
you to update the time and date settings of your Prestige. The real time is then displayed in the Prestige
error logs and firewall logs.
Select menu 24 in the main menu to open Menu 24 — System Maintenance, as shown next.
Figure 32-5 System Maintenance
Then enter 10 to go to Menu 24.10 — System Maintenance — Time and Date Setting to update the time
and date settings of your Prestige as shown in the following screen.
Figure 32-6 System Maintenance — Time and Date Setting
Menu 24.10 - System Maintenance - Time and Date Setting
Use Time Server when Bootup= None
Time Server Address= N/A
Current Time: 00 : 00 : 00
New Time (hh:mm:ss): 11 : 23 : 16
Current Date: 2000 - 01 - 01
New Date (yyyy-mm-dd): 2001 - 03 - 01
Time Zone= GMT
Daylight Saving= No
Start Date (mm-dd): 01 – 00
End Date (mm_dd): 01 – 00
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.
Menu 24 - System Maintenance
1. System Status
2. System Information
3. Log and Trace
4. Diagnostic
5. Backup
Configuration
6. Restore Configuration
7. Upload Firmware
8. Command Interpreter Mode
9. Call Control
10. Time and Date Setting
11. Remote Management
Enter Menu Selection Number: