ZyXEL Communications 792H User Manual

Page 321

Advertising
background image

Prestige 791R G.SHDSL Router

Filter Configuration

28-11

Table 28-3 TCP/IP Filter Rule

FIELD DESCRIPTION

EXAMPLE

IP Protocol

This is the upper layer protocol, for example, TCP is 6,
UDP is 17 and ICMP is 1. The value must be between 0
and 255. A value of O matches ANY protocol.

0 to 255

IP Source Route

IP Source Route is an optional header that dictates the
route an IP packet takes from its source to its destination.
If Yes, the rule applies to any packet with an IP source
route. The majority of IP packets do not have source
route.

No

(default)

Destination:

IP Addr

Type the destination IP address of the packet you want to
filter. This field is ignored if it is 0.0.0.0.

IP address

IP Mask Type the IP mask to apply to the Destination: IP Addr

field.

IP mask

Port # Type the destination port of the packets you want to filter.

The field range is 0 to 65535. A 0 field is ignored.

0 to 65535

Port # Comp Select the comparison to apply to the destination port in

the packet against the value given in Destination: Port #.
Choices are None, Less, Greater, Equal or Not Equal.

None

Source:

IP Addr

Type the source IP Address of the packet you want to
filter. A 0.0.0.0 field is ignored.

IP address

IP Mask Type the IP mask to apply to the Source: IP Addr field.

IP mask

Port # Type the source port of the packets you want to filter. The

range of this field is 0 to 65535. A 0 field is ignored.

0 to 65535

Port # Comp Select the comparison to apply to the source port in the

packet against the value given in Source: Port # field.
Choices are None, Less, Greater, Equal or Not Equal.

None

TCP Estab

This applies only when the IP Protocol field is 6, TCP. If
Yes, the rule matches packets that want to establish TCP
connection(s) (SYN=1 and ACK=0); else it is ignored.

No

(default)

More

If Yes, a matching packet is passed to the next filter rule
before an action is taken or else the packet is disposed of
according to the action fields.

If More is Yes, then Action Matched and Action Not
Matched will be N/A.

No

(default)

Advertising