Ike setup, 4 ike setup – ZyXEL Communications 792H User Manual

Page 397

Advertising
background image

Prestige 792H G.SHDSL Router

VPN/IPSec Setup

36-11

36.4 IKE Setup

To edit this menu, the Key Management field in Menu 27.1.1 – IPSec Setup must be set to IKE. Move the
cursor to the Edit Key Management Setup field in Menu 27.1.1 – IPSec Setup; press [SPACE BAR] to
select Yes and then press [ENTER] to display Menu 27.1.1.1 – IKE Setup.

Figure 36-5

Menu 27.1.1.1 IKE Setup

The following table describes the fields in this menu.

Table 36-3

Menu 27.1.1.1 IKE Setup

FIELD DESCRIPTION

EXAMPLE

Phase 1

Negotiation

Mode

Press [SPACE BAR] to choose from Main or Aggressive and then press
[ENTER]. See earlier for a discussion of these modes. Multiple SAs
connecting through a secure gateway must have the same negotiation mode.

Main

PSK (Pre-

Shared Key)

Prestige gateways authenticate an IKE VPN session by matching pre-shared
keys. Pre-shared keys are best for small networks with fewer than ten nodes.
Enter your pre-shared key here. Enter up to 31 characters. Any character may
be used, including spaces, but trailing spaces are truncated.

Both ends of the VPN tunnel must use the same pre-shared key. You will
receive a “PYLD_MALFORMED” (payload malformed) packet if the same pre-
shared key is not used on both ends.

Menu 27.1.1.1 - IKE Setup

Phase 1

Negotiation Mode= Main

PSK= 123456789

Encryption Algorithm= DES
Authentication Algorithm= SHA1

SA Life Time (Seconds)= 28800

Key Group= DH1

Phase 2
Active Protocol = ESP

Encryption Algorithm = DES

Authentication Algorithm = SHA1

SA Life Time (Seconds)= 28800

Encapsulation = Tunnel

Perfect Forward Secrecy (PFS)= None

Press ENTER to Confirm or ESC to Cancel:

Advertising