ZyXEL Communications 792H - Manual (Page 215)

Prestige 792H G.SHDSL Router
Remote Management 15-3
15.5 Configuring Remote Management
Click Remote Management to open the following screen.
Figure 15-2 Remote Management
The following table describes the labels in this screen.
Table 15-1 Remote Management
LABEL DESCRIPTION
Server Type Each of these labels denotes a service that you may use to remotely manage the Prestige.
Access
Status Select the access interface. Choices are All, LAN Only, WAN Only and Disable.
Port This field shows the port number for the remote management service. You may change the port
number for a service in this field, but you must use the same port number to use that service for
remote management.
Secured
Client IP The default 0.0.0.0 allows any client to use this service to remotely manage the Prestige. Type
an IP address to restrict access to a client with a matching IP address.
Apply Click Apply to save your settings back to the Prestige.
Cancel Click Cancel to begin configuring this screen afresh.