ZyXEL Communications 792H - Manual (Page 58)

Prestige 792H G.SHDSL Router
3-4 WAN
is not practical to have a separate VC for each carried protocol, for example, if charging heavily depends on
the number of simultaneous VCs.
3.5 VPI and VCI
Be sure to use the correct Virtual Path Identifier (VPI) and Virtual Channel Identifier (VCI) numbers
assigned to you. The valid range for the VPI is 0 to 255 and for the VCI is 32 to 65535 (0 to 31 is reserved
for local management of ATM traffic). Please see the appendix for more information.
3.6 Wizard Setup Configuration: First Screen
In the SITE MAP screen click Wizard Setup to display the first wizard screen.
Figure 3-1 Wizard Screen: WAN Setup
The following table describes the labels in this screen.
Table 3-1 Wizard Screen: WAN Setup
LABEL DESCRIPTION