ZyXEL Communications 792H - Manual (Page 384)

Prestige 791R G.SHDSL Router
35-2 Remote Management
35.1.3 Remote Management and Web Services
You can use the Prestige’s embedded web configurator for configuration and file management. See the
online help for details.
35.1.4 Disabling Remote Management
To disable remote management of a service, select Disable in the corresponding Server Access field.
35.2 Remote Management Setup
Enter 11 in menu 24 to display Menu 24.11 — Remote Management Control (shown next).
Figure 35-2 Remote Management Control
Table 35-1 Remote Management Control
FIELD DESCRIPTION EXAMPLE
Telnet Server
FTP Server
Web Server Each of these read-only labels denotes a service that you may use
to remotely manage the Prestige.
Server Port This field shows the port number for the remote management
service. You may change the port number for a service if needed,
but you must use the same port number to use that service for
remote management. 23
Server Access Select the access interface (if any) by pressing the [SPACE BAR].
Choices are: LAN only, WAN only, All or Disable. The default is
LAN only. LAN only
Menu 24.11 - Remote Management Control
TELNET Server:
Server Port = 23 Server Access = LAN only
Secured Client IP = 0.0.0.0
FTP Server:
Server Port = 21 Server Access = LAN only
Secured Client IP = 0.0.0.0
Web Server:
Server Port = 80 Server Access = LAN only
Secured Client IP = 0.0.0.0
Press ENTER to Confirm or ESC to Cancel: