ZyXEL Communications 792H - Manual (Page 257)

Prestige 792H G.SHDSL Router
Dial Backup 21-7
Table 21-4 Remote Node Profile (Backup ISP)
FIELD DESCRIPTION EXAMPLE
Once you have configured this menu, press [ENTER] at the message “Press ENTER to Confirm...” to
save your configuration, or press [ESC] at any time to cancel.
21.2.1 Editing PPP Options
The Prestige’s dial back-up feature uses PPP. To edit the remote node PPP Options, move the cursor to the
Edit PPP Options field in Menu 11.1 - Remote Node Profile, and use the space bar to select Yes. Press
[Enter] to open menu 11.2 as shown next.
Figure 21-4 Menu 11.2 - Remote Node PPP Options
This table describes the Remote Node PPP Options menu, and contains instructions on how to configure
the PPP options fields.
Figure 21-5 Remote Node PPP Options Menu Fields
FIELD DESCRIPTION EXAMPLE
Encapsulation Press [SPACE BAR] and then [ENTER] to select CISCO PPP if
your Dial Backup WAN device uses Cisco PPP encapsulation,
otherwise select Standard PPP. Standard PPP
(default)
Compression Press [SPACE BAR] and then [ENTER] to select Yes to enable or
No to disable Stac compression. No
(default)
21.2.2 Editing TCP/IP Options
Menu 11.2 - Remote Node PPP Options
Encapsulation= Standard PPP
Compression= No
Enter here to CONFIRM or ESC to CANCEL:
Press Space Bar to Toggle.