Xantrex Technology XTR 850 Watt - Manual (Page 103)

Analog Programming Mode
975-0200-01-01 4-11
4
The output voltage display should read LE U and the output current
display will display APG level.
4. Press the Rotary knob/Enter button to return to normal mode.
5. If the APG mode was modified in step 2, execute the procedure to
deactivate the APG voltage mode.
Quick Tip
Remote operation
uses these SCPI
commands. See
page 5–1.
The SCPI commands for these instructions are:
[:]SYSTem[<channel>]:REMote:SOURce[:VOLTage][:NISOlated]
[:]SYSTem[<channel>]:COMMunicate:APRogram:LEVel[:VOLTage]
[:ISOlated]
[:]MEASure[<channel>]:APRogram[:VOLTage][:SCALar][:DC]?