Xantrex Technology XTR 850 Watt - Manual (Page 224)

A-16 975-0200-01-01 S
C
PI
C
o
mm
an
d
R
e
fe
re
n
ce
Trigger *TRG Trigger system N/A
Self-Test
Query *TST?
[:]SYSTem[<channel>]:TEST?
Perform unit Self Test
(Pass=0). Yes
Wait To
Continue *WAI
[:]SYSTem[<channel>]:WAIT
Wait to continue command. N/A
Table A-2 Readback Commands
Function SCPI Command Description
Parameter and
Range
Query
Read Output
Current [:]MEASure[<channel>][:SCALar]:CURRent
[:DC]?
Measure and readback
output current at the
output terminals. Yes
Read Output
Voltage [:]MEASure[<channel>][:SCALar][:VOLTage]
[:DC]?
Measure and readback
output voltage at the
output terminals. Yes
Table A-3 SCPI Commands for Output Control
Function SCPI Command Description
Parameter and
Range
Query
Set Output
latches for the
alarms [[:]SOURce[<channel>]]:COMBine:CSHare
[:MODE]
Sets the output latches for
the alarms. ?|<alarm sum of
latch flags> Yes
Set
(Immediate)
Current Set
point [[:]SOURce[<channel>]]:CURRent[:LEVel]
[:IMMediate][:AMPLitude]
Set current set point
(immediate) ?|<Current Set
Point>|MAXimum|
MINimum Yes
Table A-1 IEEE 488.2 Commands (Continued)