Xantrex Technology XTR 850 Watt - Manual (Page 242)

A-34 975-0200-01-01 S
C
PI
C
o
mm
an
d
R
e
fe
re
n
ce
Table A-11 Protection Commands
Function SCPI Command Description
Parameter and
Range
Query
Enable the
interlock
functionality. [:]SENSe[<channel>]:PROTection
:INTerlock[:STATe]
Control the Enable/Disable
state of the Interlock
System. ?|ON|OFF Yes
Table A-12 Auto Sequence Commands
Function SCPI Command Description Parameter and Range Query
Delete all
sequences. [:]PROGram[<channel>]:DELete:ALL Erases the sequence
currently in memory. N/A
Change Auto
Sequence
operating
state. [:]PROGram[<channel>]:STATe Access to the run state of
the Sequence. ?|RUN|STOP|PAUSE Yes
Program
selected
sequence end
action. [:]PROGram[<channel>]:REPeaT Sets the number of times
to repeat the sequence. ?|<Repeat count (1–
65534)>INFinity Yes
Begin
Recording
Auto
Sequence
Program [:]PROGram[<channel>][:RECord]:STARt Start recording new
sequence (overwrites old
sequence). N/A
Stop
Recording
Auto
Sequence
Program [:]PROGram[<channel>][:RECord]:STOP Stop recording the auto
sequence program.
(Sequence ready to run.) N/A