Xantrex Technology XTR 850 Watt - Manual (Page 233)

SPC
I Co
mmand T
ree
975-0200
-01-01
A-25
A
Setup the
Current
control source
for Non-
Isolated APG. [:]SYSTem[<channel>]:REMote:SOURce
:CURRent[:NISOlated]
Alter or query the state of
the remote programming
non isolated current APG
source. ?|LOCal|AVOLtage
|ARESistive
Yes
Set Front
Panel lock
state. [:]SYSTem[<channel>]:REMote:STATe Change front panel control
mode ?|LOCal|REMote Yes
Query SCPI
Version [:]SYSTem[<channel>]:VERSion? Returns the SCPI version
to which the instrument
complies. Format is
YYYY.V Yes
SCPI Help [:]SYSTem[<channel>]:HELP[:HEADers]? Query system for all
supported SCPI command
headers. Yes
Legacy Help [:]SYSTem[<channel>]:HELP:LEGacy? Query the system for all
supported Xantrex legacy
commands. Yes
Command
Syntax Help [:]SYSTem[<channel>]:HELP:SYNTax? Query the system for the
syntax of a command. The
command should be input
after the query as a string
parameter. To enter a
command you should do
this by typing the
command as you would on
the command line without
parameters. To find all
command headers see
[:]SYSTem:HELP
[:HEADERS]?
<COMMAND> Yes
Table A-9 System Commands (Continued)