Xantrex Technology XTR 850 Watt - Manual (Page 234)

A-26 975-0200-01-01 S
C
PI
C
o
mm
an
d
R
e
fe
re
n
ce
Alarm
Masking [:]SYSTem[<channel>]:PROTection[:MASK] Enable/disable alarms/
protection. ?|<Alarm Mask - (0–
255) Yes
Set Alarm
Output
Latches [:]SYSTem:PROTection:LATCh Sets the Alarm Output
Latches. See Table 3-6 on
page 3–21. ?| <Sum of output
latch flags> Yes
Table A-10 Status Commands
Function SCPI Command Description
Parameter and
Range
Query
Query
Operation
Status
Condition
Register [:]STATus[<channel>]:OPERation
:CONDition?
Query the Operations
Condition Register.
See Table 5-11 on page 5–
34. Yes
Set Operation
Status Enable
Register [:]STATus[<channel>]:OPERation:ENABle Access the Operations
Enable Register.
See Table 5-11 on page 5–
34. ?|<Enable Flags -
(0–65535)> Yes
Query
Operation
Status Event
Register [:]STATus[<channel>]:OPERation[:EVENt]
?
Query the Operations Event
Register.
See Table 5-11 on page 5–
34. Yes
Set Operation
Status
Negative
Transition
Register [:]STATus[<channel>]:OPERation
:NTRansition
Access the Operation
Negative Trans Filter
Register.
See Table 5-11 on page 5–
34. ?|<Transition Flags
- (0–65535)> Yes
Table A-9 System Commands (Continued)