Edimax Technology 3G-6200Wg - Manual (Page 15)

14
6. Click OK to confirm the setting. Your PC will now obtain an IP address
automatically from your Broadband Router’s DHCP server.
Note: Please make sure that the Broadband router is the only DHCP server on
your LAN.
Once you’ve configured your PC to obtain an IP address automatically,
please proceed to Step 3
.
2d) Windows NT
1. Click the Start button and select Settings, then click Control Panel. The
Control Panel window will appear.
2. Double-click Network icon. The Network window will appear. Select the
Protocol tab from the Network window.
3. Check if the TCP/IP Protocol is on your list of Network Protocols. If TCP/IP is
not installed, click the Add button to install it now. If TCP/IP is installed, go to
step 5.