Edimax Technology 3G-6200Wg - Manual (Page 78)

77
2.7.1 Port Forwarding
The Port Forwarding allows you to redirect a particular range of service port
numbers (from the Internet/WAN Ports) to a particular LAN IP address. It helps
you to host some servers behind the router NAT firewall.
Parameters Description
Enable Port
Forwarding
Enable Port Forwarding
Private IP
This is the private IP of the server behind the NAT firewall.
Note: You need to give your LAN PC clients a fixed/static
IP address in order to make port forwarding function
working properly.
Type
This is the protocol type to be forwarded. You can choose
to forward “TCP” or “UDP” packets only or select “both” to
forward both “TCP” and “UDP” packets.
Port Range The range of ports to be forward to the private IP.
Comment The description of this setting.
Add Port
Forwarding
Fill in the "Private IP", “Type”, “Port Range” and
"Comment" of the setting to be added and then click "Add".
Then this Port Forwarding setting will be added into the
"Current Port Forwarding Table" below. If you found any