Edimax Technology 3G-6200Wg - Manual (Page 58)

57
2.5.1 Basic Settings
You can set parameters that are used for the wireless stations to connect to
this router. The parameters include Mode, ESSID, Channel Number and
Associated Client.
Parameters Default Description
Mode
It allows you to set the AP to AP, Bridge or
WDS mode.
Band
It allows you to select the wireless band:
802.11b and / or 802.11g. You can select B+G
mode to allow both 802.11b and 802.11g clients
to connect to this wireless access point.
ESSID default
This is the name of the wireless access point.
All devices in the same wireless LAN should
have the same ESSID.
Channel
Number
11
The wireless channel used by the wireless
access point. All devices in the same wireless
LAN should use the same channel.
MAC
address
If you want to combine more than one network,
you have to set this access point to “AP
Bridge-Point to Point mode”, “AP Bridge-Point