Edimax Technology 3G-6200Wg - Manual (Page 52)

51
2.3.2 Static IP Address
Select Static IP address if your ISP assigned you with a specific IP address for
you to use. Your ISP should provide all the information required in this section.
(See chapter 1 “Fixed IP” for more detail)
2.3.3 PPPoE (PPP over Ethernet)
Select PPPoE if your ISP requires the PPPoE protocol to connect you to the
Internet. Your ISP should provide all the information required in this section.
(See chapter 1 “PPPoE” for more detail)
2.3.4 PPTP
Select PPTP if your ISP requires the PPTP protocol to connect you to the
Internet. Your ISP should provide all the information required in this section.
(See chapter 1 “PPTP” for more detail)
2.3.5 L2TP
Select L2TP if your ISP requires the L2TP protocol to connect to the Internet.
Your ISP should provide all the information required in this section. (See
chapter 1 “L2TP” for detailed information)
2.3.6 Telstra Big Pond
Select Telstra Big Pond if your ISP requires the Telstra Big Pond protocol to
connect to the Internet. Your ISP should provide all the information required in
this section. Telstra Big Pond protocol is used by the ISP in Australia. (See
chapter 1 “Telstra Big Pond” for more detail)