Edimax Technology 3G-6200Wg - Manual (Page 75)

74
Remote Port
Range
Enter the remote port range of the packets that this rule will
apply to. You can assign a single port number here or
assign a range of port numbers by assigning the first port
number and the last port number of the range. The two
numbers are separated by a dash “-“, for example
“101-150” means from port number 101 to port number
150, which indicates 50 port numbers.
Traffic Type
Select the traffic type of the packets that this rule will apply
to. We list some popular applications here to ease the
configuration. You also can get the same result by using
other parameters, for example source or destination port
number, if you are familiar with the application protocol.
Protocol
Select the protocol type of the packets that this rule will
apply to.
Apply Apply and exit the form.
Reset Clear the content of this form.
Click <Apply> at the bottom of the screen to save the configurations. You can
now configure other advance sections or start using the router.