Edimax Technology 3G-6200Wg - Manual (Page 96)

95
2.8.4 DMZ
If you have a local client PC that cannot run some specific Internet application
(e.g. Games) properly from behind the NAT firewall, then you can open the
client up to unrestricted two-way Internet access by defining a DMZ Host. The
DMZ function allows you to redirect all packets going to your WAN port IP
address to a particular IP address in your LAN. The difference between the
virtual server and the DMZ function is that the virtual server redirects a
particular service/Internet application to a particular LAN client/server, whereas
DMZ redirects all packets (regardless of services) going to your WAN IP
address to a particular LAN client/server.
Parameters Description
Enable DMZ
Enable/disable DMZ
Note: If there’s confliction between the virtual server and
the DMZ setting, the virtual server function will have
priority over the DMZ function.
Public IP
Address
The IP address of the WAN port or any other public IP
addresses assigned to you by your ISP.