Edimax Technology 3G-6200Wg - Manual (Page 84)

83
Popular Applications selection and click “Add”. It will
automatically list the Public Ports required for this popular
application you’d specified.
Add Special
Application
Fill in the "Trigger Port", "Trigger Type”, “Public Port”,
"Public Type", "Public Port" and "Comment" of the setting
to be added and then click "Add". Then this Special
Application setting will be added to the "Current
Trigger-Port Table" below. If you found any typo before
adding it and want to correct it, just click "Clear" and the
fields will be cleared.
If you want to add a popular application, select one
“Popular Application” and then click “Add”.
Remove
Special
Application
If you want to remove some Special Application settings
from the "Current Trigger-Port Table", select the Special
Application settings you want to remove in the table and
then click "Delete Selected". If you want remove all
Special Applications settings from the table, just click
"Delete All" button. Click "Reset" will clear your current
selections.
Click <Apply> at the bottom of the screen to save the configurations. You can
now configure other advance sections or start using the router.
Example: Special Applications
If you need to run applications that require multiple connections, specify the
port (outbound) normally associated with that application in the "Trigger Port"
field. Then select the protocol type (TCP or UDP) and enter the public ports
associated with the trigger port to open them up for inbound traffic.
Example:
ID
Trigger
Port Trigger
Type
Public Port
Public
Type
Comment
1 28800 UDP
2300-2400,
47624
TCP
MSN Game
Zone
2 6112 UDP 6112 UDP Battle.net
In the example listed above, when a user triggered port 28800 (outbound) for
MSN Game Zone then the router will direct incoming packets for ports
2300-2400 and 47624 to that user.
Note: Only one LAN client can use a particular special application at a time.