Edimax Technology 3G-6200Wg User Manual

Page 40

Advertising
background image

39

when you are not using the Internet. This function also
may not work with some ISP. So please make sure this
function can work properly when you use this function in
the first time, especially your ISP charge you by time
used. Due to the many uncontrollable issues, we do not
guarantee the WAN “idle timeout" auto-disconnect
function will always work. In order to prevent from extra
connection fee, please TURN OFF THE ROUTER WHEN
YOU ARE NOT USING INTERNET
.


Click <OK> when you have finished the configuration above. Congratulations!
You have completed the configuration for the L2TP connection. You can start
using the router now, if you wish to use some of the advance features
supported by this router see chapter 2, 3, 4.

1.6 Telstra Big Pond

Select Telstra Big Pond if your ISP requires the Telstra Big Pond protocol to
connect you to the Internet. Your ISP should provide all the information
required in this section. Telstra Big Pond protocol is used by the ISP in
Australia.

Parameter

Description

User Name

Enter the User Name provided by your ISP for the Telstra
Big Pond connection

Password

Enter the Password provided by your ISP for the Telstra
Big Pond connection

User decide login

server manually

Select if you want to assign the IP of Telstra Big Pond’s
login server manually.

Login Server

The IP of the Login Server.

Advertising