Edimax Technology 3G-6200Wg - Manual (Page 21)

20
Step 2) 3G/3.5G Internet Configuration
3G-6200Wg supports most of 3G/3.5G modem cards, just connect the modem card
to the USB port of 3G-6200Wg and 3G-6200Wg will recognize it automatically, no
additional setup procedure required. However, some of modem cards require PIN
code or account / password (you have to use 3G-6200Wg’s web interface to input
these information), and some modem cards requires you to connect the modem card
with your PC and install driver / utility before you connect it with 3G-6200Wg (all PCs
which need to access Internet by 3G-6200Wg requires to perform this procedure
once). If you still not able to connect to Internet, please use wired Internet connection
to access our website :http://www.edimax.com/ ,download latest version of firmware
and upgrade 3G-6200Wg’s firmware. If you still not be able to get connected by your
3G/3.5G modem card, please contact your dealer of purchase and provide the model
name of the 3G/3.5G modem card you have, we’ll try our best to help you to solve
the problem.
Only one Internet connection (wireless / wired) can be used at the same time.
Wireless connection (3G/3.5G) will be selected first, and use wired Internet
connection as backup. Therefore, please DO NOT connect your 3G/3.5G modem
card with 3G-6200Wg, or your telecomm service provider may charge you with high
communication fee. For example, if you connect 3G/3.5G modem card with
3G-6200Wg when you’re using wired Internet connection, wired connection will be
dropped and use 3G/3.5G wireless connection instead. If 3G/3.5G wireless signal
reception is poor and the connection can not be restored within 60 seconds,
3G-6200Wg will use wired Internet connection again, and will not switch back to
wireless Internet connection (This only happens with wired Internet connection is
available. If wired connection is unavailable, 3G-6200Wg will try to establish 3G/3.5G
wireless connection again and again). If you want to use 3G/3.5G wireless
connection again, you need to remove 3G/3.5G modem card from 3G-6200Wg and
reconnect it back after 5 seconds.
( A ) Plug and play, no setup procedure required.
Connect the USB 3G/3.5G modem card with 3G-6200Wg and make sure the
corresponding USB LED indicator of 3G-6200Wg lights up, then you can use the web
browser to access Internet.
( B ) PIN code or user name / password required:
Please check the authentication method you want to use. Most of telecomm service
providers require you to input PIN Code, please check ‘SIM’ and input the PIN code
provided by telecomm service provider. Most of options listed here are optional and
you don’t have to provide those information if telecomm service provider doesn’t
provide you with those information.
If telecomm provider provides you with username / password, please check /User