Edimax Technology 3G-6200Wg - Manual (Page 7)

6
Internet. So please turn off your computer when you are not using it. This
function also may not work with some ISP. So please make sure this function
can work properly when you use this function in the first time, especially your
ISP charge you by access time.
Back Panel
The diagram (fig1.0) below shows the broadband router’s back panel. The
router’s back panel is divided into four sections, LAN, WAN, USB, and Reset:
Figure 1.0
1) Local Area Network (LAN)
The Broadband router’s 4 LAN ports are where you connect your LAN’s PCs,
hubs / switches etc.
2) Wide Area Network (WAN)
The WAN port connected to your xDSL or Cable modem which linked to the
Internet.
3) USB
The USB ports allow you to share printer through them. Each port can support
printer .
4) Reset button
When you experience some problem on using this router, or you forgot your
password, you can press the reset button for longer than 10 seconds and the
router will reset itself to the factory default settings (warning: your original
configurations will be replaced with the factory default settings)
Front Panel
On the router’s front panel there are LEDs, which shows the status of this
router. Below is the list of each LED and its description.