Edimax Technology 3G-6200Wg - Manual (Page 92)

91
Parameters Description
Client PC
Description
The description for this client PC rule.
Client PC IP
Addresses
Enter the IP address range that you wish to apply this
access control rule. This is the user’s IP address(es) that
you wish to setup an access control rule.
Note: You need to give your LAN PC clients a fixed/static
IP address, to make the access control rule working
properly.
Client PC
Service
You can block the clients from accessing some Internet
services by checking the services you want to block.
Protocol
This allows you to select UDP, TCP or both protocol types
you want to block.
Port Range
You can assign up to five port ranges. The router will
block clients from accessing Internet services which will
use these ports.
Apply Changes Click “Apply Changes” to save the setting.
Reset Click “Reset” to clear all fields.
Click <Apply Changes> at the bottom of the screen to save the configurations.
You can now configure other advance sections or start using the router.