Edimax Technology 3G-6200Wg - Manual (Page 32)

31
1.1 Cable Modem
Choose Cable Modem if your ISP will assign you with an IP address
automatically (i.e. DHCP). Some ISP’s may also require that you fill in
additional information such as host name and MAC address (see screen
below).
Note: The Host Name and MAC address section is optional and you can skip
this section if your ISP does not require these settings.
Parameters Description
Host Name
If your ISP requires a Host Name, type in the host name
provided by your ISP, otherwise leave it blank if your ISP
does not require a Host Name.
MAC Address
Your ISP may require a particular MAC address to
connect to the Internet. This MAC address is the PC’s
MAC address that your ISP had originally connected your
Internet connection to. Type in this MAC address in this
section or use the “Clone MAC Address” button to replace
the WAN MAC address with the MAC address of that PC
(you have to be using that PC for the Clone MAC Address
button to work). To find out the PC’s MAC address see
Appendix A. (see Glossary for an explanation on MAC
address)
Click <OK> when you have finished the configuration above. Congratulations!
You have completed the configuration for the Cable Modem connection. You
can start using the router now, if you wish to use some of the advance features