Acroprint HandPunch 4000 - Manual (Page 23)

HandPunch 3000/4000 Manual
21
The HandPunch terminal has four inputs. Refer to the Inputs Wiring Diagram
on page 36.
• Request to Exit
• Door Switch
• Two Auxiliary Inputs
A Request to Exit switch (REX) on the secure side of a controlled door will
activate the lock output. When the REX switch is pressed, the door unlocks for
a specified time. The REX switch must be a momentary contact, normally open
switch rated greater than 0.5 mA, 5 VDC circuit.
A Door Switch monitors door status – open or closed. The door switch must be
a normally closed switch rated greater than 0.5 mA, 5 VDC circuit.
Auxiliary Input requirements vary, depending upon the type of input device, but
the input device should be rated greater than 0.5 mA, 5 VDC circuit.
The HandPunch allows for the connection of up to three auxiliary output
devices. Refer to the Outputs Wiring Diagram on page 35.
You can connect an external card reader (such as a magnetic stripe, bar code,
or proximity reader) to a HandPunch. This external card reader provides a
secondary level of user identification.
The HandPunch may require special format programming to be able to read
these external card reader formats. Contact your dealer for information.
The connection to an external card reader is made through TS-3 on the
HandPunch. Refer to the External Card Reader Wiring Diagram on page 37.
You can connect a serial printer to a HandPunch. A serial printer connected
to the HandPunch prints punches as they occur. Schlage Biometrics does not
supply serial printers. The connection to a serial printer is made through J4,
the 4 pin connector on the HandPunch. Refer to the Serial Printer Connection
Diagram on page 41. Refer to the Printer String Information Application Note
(available from Schlage Biometrics) for detailed information on connecting a
serial printer to a HandPunch.
If you use the serial printer option you cannot use the RS-232 HandPunch
network to host computer option (see page 18).
Request to
Exit, Door
Switch, and
Auxiliary
Inputs
Auxiliary
Outputs
External
Card Reader
Serial Printer
NOTE
NOTE