Acroprint HandPunch 4000 - Manual (Page 77)

HandPunch 3000/4000 Manual
75
To reset the memory of the HandPunch follow these steps-
1. Remove power and battery jumper, if a back up is installed
2. Press down on reset button and apply power
3. Release button
4. Reader will boot to
• Press 1 to erase setup i.e. address, outputs, passwords, but retain
user database and datalogs
• Press 9 to erase everything i.e. HandPunch goes back to factory
defaults
Memory
Reset
ERASE :1 SETUP
:9 ALL!!!