Acroprint HandPunch 4000 - Manual (Page 62)

Programming the HandPunch
60
Management Menu
The Management menu commands allow you to manage employee data
stored in a HandPunch unit. The following section provides a brief summary of
the employee data that may be manipulated on a HandPunch unit.
Enter the appropriate password to enter the Setup command menu. Once
you have entered the command menu, there are three options available for
navigating the command menu system.
• Press # to enter the command shown on the display.
• Press * to step to the next command in the menu.
• Press CLEAR to exit the command menu (pressing any numeric key also
exits the command menu). If you are in a command’s sub-menu, press
CLEAR multiple times to completely exit the command menu.
There are four commands available from the Management command menu.
• Supervisor Override
• List Users
• Set User Data
• Restrictions
Refer to Table 10 and identify the command you need to perform. Step through
all previous commands until you reach the desired command.
Table 10: Setup Command Menu
Setup Menu
Password = 3
Supervisor Override
Review
ID #
Add
Bulk Hours
Bulk Dollars
Punch