Acroprint HandPunch 4000 - Manual (Page 33)

HandPunch 3000/4000 Manual
31
Wiring Connections
Once the HandPunch is attached to the wall plate the wiring connections to
the HandPunch can be made (see Figure 4-1).
WALL
Serial RS-232
Optional Modem
or Ethernet
Wall Plate
Top of
Terminal
Top of HandPunch
Power
Connectors
J7 Battery
Jumper
Terminal
Strips
Reset
Switch
RJ-11
RS-422
Figure 4-1: Wiring Connections
The following tables provide the pinouts for the terminal strips on the
HandPunch.
• “Table 2” on page 32 provides the pinouts for TS-2: Input Connections.
• “Table 3” on page 32 provides the pinouts for TS-3: Card Reader and Output
Connections.
• “Table 4” on page 33 provides the pinouts for the Serial RS-232 Connection.
• “Table 5” on page 33 provides the pinouts for the RS-422 HandPunch to
HandPunch Network Connection.
The following figures provide the pinout diagrams for the RJ-11 and RS-232
connectors:
• “Figure 4-2” on page 33 provides the pinouts for J3, the RJ-11/RS-422
Network Configuration.
• “Figure 4-3” on page 34 provides the pinouts for J8, the RS-232 Serial Printer
Connection.
Wiring
Examples