Acroprint HandPunch 4000 - Manual (Page 9)

HandPunch 3000/4000 Manual
7
Specifications
Table 1: Specifications
Size: 8.85 inches wide by 11.65 inches high by 8.55 inches deep.
223 cm wide by 29.6 cm high by 21.7 cm deep.
Power: 12 to 24 VDC or 12 to 24 VAC 50-60 Hz, 7 watts
Weight: 6 lbs (2.7 kg) – 7 lbs (3.2 kg) with optional backup battery
Wiring: 2 twisted-pair, shielded, AWG 22 or larger (such as Belden 82732)
Temperature: -10°C to +60°C – non-operating/storage (14°F to 140°F)
5°C to 40°C – operating (40°F to 110°F)
Relative Humidity Non-
Condensing: 5% to 95% – non-operating/storage (non-condensing)
20% to 80% – operating
Verification Time: 1 second or less
Memory Retention: 5 years using a standard internal lithium battery
Transaction Buffer: HP-3000 – 5,120 transactions
HP-4000 – 7,680 transactions
ID Number Length: 1 to 10 digits
Baud Rate: 300 to 28.8 K bps
Communications: RS-232, RS-422, optional Modem, optional Ethernet
User Capacity: HP-3000 – 512 users expandable to 40,xxx
HP-4000 – 530 users expandable to 5,xxx
Message Capacity: HP-4000 – 550 exandable to 3520 (not available with the HP-3000)
Function Keys: HP-3000 – 2 user definable, HP-4000 – 10 user definable
Card Reader Input: Proximity, Wiegand, Magnetic Stripe, Bar Code
(5 VDC provided by HandPunch unit)
Door Controls: Lock output, Request to Exit input, Door Switch input
(open collector, 5 VDC present, sinks to ground, 100 mA max)
Alarm Monitoring: Tamper, Door Forced
Event Monitoring: There are a variety of monitoring options including events such as:
Invalid ID, Time Zone Violation, ID Refused, Try Again, Power
Failure
Time Zones: 62 total: 2 fixed, 60 programmable