Garmin G1000 Piper PA32 - Manual (Page 144)

GPS NAVIGATION
190-00692-00 Rev. B 5-10 Garmin G1000 Pilot’s Guide for Piper PA32
Land Data
The Navigation Map can display background land data (roads, lakes, borders, etc). The background
land data can also be removed from the display (turned off).
Enabling/disabling land data:
1) Press the MENU Key with the Navigation Map Page displayed. The cursor flashes on the ‘Map Setup’ option.
2) Press the ENT Key. The Map Setup Menu is displayed.
3) Select the ‘Map’ group.
4) Press the ENT Key.
5) Highlight the ‘LAND DATA’ field.
6) Select ‘On’ or ‘Off.’.
7) Press the FMS Knob to return to the Navigation Map Page.
Track Vector
Figure 5-7 Track Vector
Track Vector
The Navigation Map can display a track vector as a dashed light blue line segment with an arrowhead
attached to the end, extended to a predicted location in 60 seconds along the current aircraft track (Figure
5-7). The track vector is useful in minimizing track angle error. The track vector look-ahead times are
selectable times (30 sec, 60 sec, 2 min, 5 min, 10 min, 20 min) that determine the length of the track
vector to project from the current aircraft position so that the arrow head is constantly pointing to the
location that the aircraft will be along the current aircraft track in the selected time.