Garmin G1000 Piper PA32 - Manual (Page 145)

GPS NAVIGATION
190-00692-00 Rev. B 5-11 Garmin G1000 Pilot’s Guide for Piper PA32
For example, if a user selects the 60 second track vector look-ahead time on the Map Setup page, the
track vector displayed on the map is the length equivalent to 60 seconds from the current aircraft position
along the current aircraft track.
Enabling/disabling the track vector:
1) Press the MENU Key with the Navigation Map Page displayed. The cursor flashes on the ‘Map Setup’ option.
2) Press the ENT Key. The Map Setup Menu is displayed.
3) Select the ‘Map’ group.
4) Press the ENT Key.
5) Highlight the ‘TRACK VECTOR’ field.
6) Select ‘On’ or ‘Off’. Press the ENT Key to accept the selected option. The flashing cursor highlights the ‘LOOK
AHEAD’ time field. Use the
FMS Knobs to select the desired time (30 seconds, 60 seconds, 2 minutes, 5
minutes, 10 minutes, 20 minutes). Press the ENT Key.
7) Press the FMS Knob to return to the Navigation Map Page.
Wind Vector
The wind vector is displayed in the upper right corner of the map and displays wind direction and
speed (in knots). Wind direction is indicated by an arrow.
Enabling/disabling the wind vector:
1) Press the MENU Key with the Navigation Map Page displayed. The cursor flashes on the ‘Map Setup’ option.
2) Press the ENT Key. The Map Setup Menu is displayed.
3) Select the ‘Map’ group.
4) Press the ENT Key.
5) Highlight the ‘WIND VECTOR’ field.
6) Select ‘On’ or ‘Off’.
7) Press the FMS Knob to return to the Navigation Map Page.