Garmin G1000 Piper PA32 - Manual (Page 354)

Garmin G1000 Pilot’s Guide for Piper PA32 190-00692-00 Rev. B 8-2
ADDITIONAL FEATURES
Any map page that displays the navigation view can also show the SafeTaxi airport layout within the maximum
configured range. The following is a list of pages where the SafeTaxi feature can be seen:
• Navigation Map Page
• Inset Map (PFD)
• Weather Datalink Page
• Airport Information Page
• Intersection Information Page
• NDB Information Page
• VOR Information Page
• User Waypoint Information Page
• Trip Planning Page
• Nearest Pages
During ground operations the aircraft’s position is displayed in reference to taxiways, runways, and airport
features. In the example shown in Figure 8-1, the aircraft is on Taxiway Charlie approaching the beginning of
runway 03.
Figure 8-1 SafeTaxi Depiction on the Navigation Map Page
Aircraft
Position
Runway
Number
Airport
Features
Taxiway
Identification
DCLTR Softkey
Removes
Airport Runway
and Taxiway
Markings
Pressing the DCLTR Softkey (declutter) once removes the taxiway markings and airport identification labels.
Pressing the DCLTR Softkey twice removes VOR station ID, the VOR symbol, and intersection names if within
the airport plan view. Pressing the DCLTR Softkey a third time removes the airport runway layout, unless the
airport in view is part of an active route structure. Pressing the DCLTR Softkey again cycles back to the original
map detail. Refer to Map Declutter Levels in the GPS Navigation Section.