Garmin G1000 Piper PA32 - Manual (Page 420)

190-00692-00 Rev. B Garmin G1000 Pilot’s Guide for Piper PA32 A-14
APPENDIX A
GDL 69A MESSAGE ADVISORIES
Message Comments
GDL69 CONFIG – GDL 69
configuration error. Config service
req’d.
GDL 69 configuration settings do not match those of backup configuration
memory. The G1000 system should be serviced.
GDL69 FAIL – GDL 69 has failed. A failure has been detected in the GDL 69. The receiver is unavailable. The
G1000 system should be serviced
MANIFEST – GDL software mismatch.
Communication halted. The GDL 69 has incorrect software installed. The G1000 system should be
serviced.
GDC 74A MESSAGE ADVISORIES
Message Comments
MANIFEST – GDC1 software
mismatch. Communication halted. The GDC 74A has incorrect software installed. The G1000 system should be
serviced.
MISCELLANEOUS MESSAGE ADVISORIES
Message Comments
FPL WPT LOCK – Flight plan waypoint
is locked. Upon power-up, the G1000 system detects that a stored flight plan waypoint is
locked. This occurs when an aviation database update eliminates an obsolete
waypoint. The flight plan cannot find the specified waypoint and flags this
message. This can also occur with user waypoints in a flight plan that is deleted.
Remove the waypoint from the flight plan if it no longer exists in any database,
OR
update the waypoint name/identifier to reflect the new information.
FPL WPT MOVE – Flight plan
waypoint moved. The system has detected that a waypoint coordinate has changed due to a new
aviation database update. Verify that stored flight plans contain correct waypoint
locations.
TIMER EXPIRD – Timer has expired. The system notifies the pilot that the timer has expired.
DB CHANGE – Database changed.
Verify user modified procedures. This occurs when a stored flight plan contains procedures that have been
manually edited. This alert is issued only after an aviation database update.
Verify that the user-modified procedures in stored flight plans are correct and up
to date.
DB CHANGE – Database changed.
Verify stored airways. This occurs when a stored flight plan contains an airway that is no longer
consistent with the aviation database. This alert is issued only after an aviation
database update. Verify use of airways in stored flight plans and reload airways
as needed.