Garmin G1000 Piper PA32 - Manual (Page 315)

190-00692-00 Rev. B Garmin G1000 Pilot’s Guide for Piper PA32 6-35
HAZARD AVOIDANCE
Changing between ‘cell’ and ‘strike’ mode:
1) Select the Stormscope Page.
2) Press the MODE Softkey. The CELL and STRIKE softkeys are displayed.
3) Press the CELL Softkey to display ‘CELL’ data or press the STRIKE Softkey to display ‘STRIKE’ data. ‘CELL’ or
‘STRIKE’ is displayed in the mode box in the upper left corner of the Stormscope Page.
4) Press the BACK Softkey to return to the Stormscope Page.
OR :
1) Select the Stormscope Page.
2) Press the MENU Key.
3) Turn the small FMS Knob to choose between ‘CELL’ and ‘STRIKE’ options.
4) When an item is selected, press the ENT Key.
If heading input is lost, strikes and/or cells must be cleared manually after the execution of each turn
(Figure 6-43). This is to ensure that the strike and/or cell positions are depicted accurately in relation to the
nose of the aircraft.
Manually clearing Stormscope data:
1) Select the Stormscope Page.
2) Press the MENU Key.
3) Select ‘Clear Stormscope Lightning’.
3) Press the ENT Key.
OR :
1) Select the Stormscope Page.
2) Press the CLEAR Softkey.
Figure 6-43 Navigation Map Page Options Menu