Garmin G1000 Piper PA32 User Manual
Page 173
Advertising
GPS NAVIGATION
190-00692-00 Rev. B
5-39
Garmin G1000 Pilot’s Guide for Piper PA32
6)
Press
ENT
again to activate a Direct-to.
Select a Direct-to Destination to a Recently Entered Identifier
1)
Press the
Direct-to
(
)
Key.
2)
Turn the small
FMS
Knob to the left. Initially, a flight plan waypoint list is displayed as in Figure 5-37. The list
is populated only when navigating a flight plan.
Figure 5-39 Recently Entered Waypoints List (MFD)
3)
Turn the small
FMS
Knob to the right to display the ‘RECENT’ waypoints as shown in Figure 5-37.
4)
Turn the large
FMS
Knob to select the desired airport.
5)
Press the
ENT
Key. The cursor is now displayed on ‘ACTIVATE?’.
6)
Press
ENT
again to activate a Direct-to.
Advertising