Garmin G1000 Piper PA32 - Manual (Page 213)

GPS NAVIGATION
190-00692-00 Rev. B 5-79 Garmin G1000 Pilot’s Guide for Piper PA32
After selecting the desired airway for display, it can be loaded into a flight plan. Loading an airway into a flight
plan is done in six steps as follows:.
1. Select the airway insertion point on the original flight plan
2. Access the Airway Loading Page
3. Select an airway from a list
4. Select an exit waypoint from a list
5. Preview the sequence of waypoints
6. Load the selected airway segment into the flight plan
Select the airway insertion point on the original flight plan:
Move the cursor to the spot after the desired airway entry waypoint. In the example given in Figure 5-72, the pilot
wants to join an airway after ANX, so the cursor is moved to the line just beyond ANX (which is over waypoint
FRANC).
Figure 5-72 Airway Insertion Point
Access the Airway Loading Page:
Press the MENU Key and select “Load Airway” from the Flight Plan Page Menu (Figure 5-72).